background image

SR835 Crossover

REAR PANEL

1. High Bal - This is a TRS balanced output for the high frequencies in both
Mono mode and Channel 2 in Stereo mode.

2. High Unbal - This is an unbalanced out put for the high frequencies in both
Mono mode and Channel 2 in Stereo mode.

3. Low/Mid Bal - This is a TRS balanced low frequency output for Channel 2 in
Stereo mode and a TRS balanced mid range frequency output in Mono mode.

4. Low/Mid Unbal - This is an unbalanced low frequency output for Channel 2
in Stereo mode and an unbalanced mid range frequency output in Mono mode.

5. Channel 2 Input - This is a TRS balanced input for Channel 2 in stereo mode.
This jack has no function in Mono mode.

6. Low Sum Output - This is a mono output containing the sum of Channel 1
and Channel 2 low frequencies.

7. High Bal - This is a TRS balanced high frequency output for Channel 1 in
Stereo mode.This jack has no function in Mono mode.

8. High Unbal - This is an unbalanced high frequency output for Channel 1 in
Stereo mode.This jack has no function in Mono mode.

9. Low Bal - This is a TRS balanced low frequency output in both Mono mode
and Channel 1 in Stereo mode.

10. Low Bal - This is an unbalanced low frequency output in both Mono mode
and Channel 1 in Stereo mode.

11. Channel 1 Input - This is a TRS balanced input for Channel 1 in stereo
mode and the master input in mono mode.

12. Power Receptacle - Connect the provided power cord from this recepta-
cle to an AC outlet.

3

HIGH BAL.

HIGH BAL.

HIGH UNBAL.

HIGH UNBAL.

LOW BAL.

MID BAL.

LOW UNBAL.

MID UNBAL.

INPUT

HIGH BAL.

HIGH UNBAL.

LOW BAL.

LOW BAL.

LOW UNBAL.

LOW UNBAL.

INPUT

STEREO

MONO

AVIS:  RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR

WARNING:  SHOCK HAZARD-DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE BACK.  NO USER
SERVICEABLE PARTS INSIDE.  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CHANNEL 2

CHANNEL 1

LOW SUM OUT

120 V

DOD Professional Products

STEREO

MONO

60 Hz
50 Hz

100 V

OR

18 WATTS

1

2

3

4

5

7

8

9

10

11

6

Sandy,Utah U.S.A.

12

Summary of Contents for SR835













Reviews:

Related manuals for SR835