DOD Champion SP1, User Manual, Page: 21 / 32

19
Camera Settings
Racing Mode: Second Settings Page
Accessed by pressing
[ ]
twice during the Standby Mode.
Racing Mode Settings
Measures the performance of your vehicle:
Acceleration Times
Lap Timers
0-400m Timer
Braking Test
Press
[ ]
to perform the test once the desired function was chosen.
Note: The Racing Mode is only enabled when it locks onto GPS signals
.
Note: The quick access to one of the above functions can be created by Shortcut Setup.
Acceleration Times
“Acceleration Timer” is used to measure the acceleration performance of your vehicle. Scroll up
and down by using the
[ ]/[ ]
to the speed range you prefer. Press the
[ ]
found on top of
your unit to confirm your selection.
The Acceleration Screen displays the time of the present test ranges:
0-100km/h 100-200km/h 60-250km/h 0-60mph Timer 0-120mph Timer
The estimated vehicle acceleration time feature allows you to view times in seconds.
Screen shows the current acceleration and peak acceleration achieved this run.
You can immediately start your vehicle without pressing any other buttons after confirming the
settings since the Timer will automatically be activated once it detects the vehicle is moving
forward. After measurement has begun, accelerate until you have reached the desired speed.
The screen will automatically display the results as they happen, e.g. if you choose 0-100km/h
Timer, then the 0-100 section will show the time taken and the best record you have achieved
since you turn on the device this time.