DOD Champion SP1, User Manual

Page: 13 / 32

11
Installing Your Camera
4. Adjust the Angle
The mount has an adjustable ball joint which can be loosened using the plastic locking nut.
Angle your camera slightly below the horizon line to minimize glare.
Press the mount firmly against the glass and turn the mount arm to secure the mount.
5. Install the Cigarette Adapter
If you have not done so previously, plug the cigarette adapter into your vehicle's power port.
Insert the USB plug (opposite end of the power) into the USB port on the camera.
The wiring can be hidden in the headliner, seams and rubber strips around the perimeter of the
windshield.
6. Remove the Protective Lens Cover
Your camera is now installed and ready for daily use.
Tips:
If grease, fingerprints, or blots are found on the external/internal windshield of the car, please wipe
it clean or install the unit on an unaffected area. Blots may worsen the recording quality or may
cause the bracket to be unstable.
Do not turn on Motion Detection unless your vehicle is parked. If Motion Detection is enabled while
driving, the camera may not continuously record.
DOD Tech recommends setting the G-Sensor to low.