Docomo L-02A, Instruction Manual

Page: 33 / 61

85
Setting up
Installing L-02A Connection Software
on Windows (including a driver)
The L-02A connection software only need to be installed
when you connect the FOMA terminal to your PC for the
first time.
Installing
For Windows Vista
a
Connect the FOMA terminal with a PC
The setup screen of L-02A connection software is
automatically displayed by zero installation.
"自動再生" screen will be displayed depending on setting.If the
screen is displayed, check "ソフトウェアとゲームに対しては常に
次の動作を行う" and select "Launcher.exeの実行"
np
※ When the Setting up screen of L-02A connection
software is not automatically displayed, install with the
included CD-ROM (P87)
Note
•
Do not remove the FOMA terminal while installing.
• Installation may take several minutes depending on the PC
you use.
•
Do not install or uninstall during data communication.
• When installing, make sure to install from the account with
PC supervisor privileges. An error will occur during
installation if you install from the account without these
privileges.
• For details on setting up PC supervisor privileges, contact
your computer manufacturer or Microsoft Corporation.
CON_Guide_E.book 85 ページ ２００８年１１月２６日 水曜日 午後６時４３分