410
Other Useful Functions
Schedule/ ToDo
Status
Function
Alarm clock
If “Snooze setting” is set to “OFF”, an alarm tone sounds
continuously for about 5 minutes. If “Snooze setting” is set to
“ON”, an alarm tone sounds continuously for about 1 minute,
repeating 6 times at intervals of about 5 minutes. An
animation appears on the display and the image window.
No alarm notification is provided on the set time. When the
set time elapses while the power is off and no repetition (“1
time”) is set, the setting is “OFF”. If a repetition (“Daily” or
“Select day”) is set, the settings for later days remain set.
The clock alarm tone (pippipi
…
) sounds 3 times from the earpiece speaker. An animation appears
on the display.
Alarm notification is provided in the same way as “During a call”. For an incoming call, alarm
notification is provided when you answer, in the same way as for “During a call”.
Alarm notification is provided in the same way as “While the standby display is displayed”.
No alarm notification is provided even at the specified time. After the data transmission is finished,
“ ” (Missed alarm) desktop icon appears on the standby display.
→
p.411
An alarm tone sounds for about 20 seconds from the earphone. After about 20 seconds, an
alarm tone sounds from both the earphone and speaker. An animation appears on the display
and the image window.
Alarm notification is provided in the same way as “While the
standby display is displayed”. If you clear the alarm
notification display, the PIN1 code entry screen reappears.
No alarm notification is provided even at the specified time.
After canceling the All/PIM lock, “ ” (Missed alarm)
desktop icon appears on the standby display (p.411). When
the power is off during the All/PIM lock, the power is not
turned on even at the specified time and the “ ” (Missed
alarm) desktop icon does not appear even after canceling
the All/PIM lock.
While the standby
display is displayed
When the power is off
During a call
When receiving/making a
call
During i-mode/mail
transmission
During operation of the
SD-PIM function, or data
transfer by Ir exchange or
cable connection
When the earphone/
microphone is connected
(When setting
“Earphone” to
“Earphone”)
When “PIN1 code entry set”
is set to “ON” and PIN1
code entry screen after
turning on the power is
displayed
During All lock/PIM lock
An alarm tone sounds continuously
for about 5 minutes, and an
animation appears on the display
and the image window.
No alarm notification is provided at
the set time. However, the settings
remain set.
Alarm notification is provided after
you enter the correct PIN1 code.
No alarm notification is provided
even at the specified time. After
canceling the All/PIM lock,
“ ” (Missed alarm) desktop icon
appears on the standby display.
→
p.411
●
When the alarm notification settings for the “Alarm clock”, “Schedule” and “ToDo” are set to the same time, the
priority is given as follows.
①
has the top priority.
①
Alarm clock
②
ToDo
③
Schedule
If alarm notification could not be provided, “
” (Missed alarm) desktop icon appears on the standby display.
●
At the alarm notification for “Schedule” entries stored as secret data, a secret animation appears with no alarm
message. At the alarm notification when the “Secret mode” or “Secret only mode” is set, the stored message and
animation appear. Regardless of whether the “Secret mode” or “Secret only mode” is set, the specified alarm tone
sounds.
●
The alarm tone for the “Schedule” and “ToDo” sounds at the volume set in the “Phone/Video-phone” of the “Ring
volume”.
●
During a call, the clock alarm tone sounds at the volume set in the “Volume”.
●
During the manner mode, the alarm tone sounds at the volume set in the “Manner mode set”.
●
If the “Vibrator” is set to other than “OFF”, an alarm tone sounds with vibration.
