5
Reinstalling the Outlet–
Install the USB charging outlet in the receptacle
box before plugging in the Docking Drawer.
• After the receptacle box has been correctly installed in the
back of the drawer and (if applicable) all wires correctly
reattached, the USB charging outlet can be installed.
REMINDER: IF THE CABLE ARM GROUND WIRE WAS REMOVED DURING
INSTALLATION, MAKE SURE IT HAS BEEN REATTACHED AND TORQUED
PROPERLY. MAKE SURE THE CIRCUIT BREAKER IS WIRED IN SERIES WITH
THE LINE (BLACK) WIRE AS SHOWN IN THE WIRING DIAGRAM.
• Follow the USB charging outlet instructions (included in outlet packaging)
and connect the black, white, and green wires in accordance with those
instructions.
Specifications–
Docking Drawer Slim USB Technical Specifications:
• DC (USB) Power: 5.2V, 12.5W duplex USB charging receptacle with
integrated on/off safety switch.
• Max rated current @ 125 VAC: 3A. Circuit is protected by 5A pop out
breaker accessible from the user side. Designed for charging personal
electronic devices only.
Operation–
• Instructions specific to the USB charging outlet are
included with the outlet itself.
• The Docking Drawer Slim USB outlet includes a 5A resetta-
ble circuit breaker. Breaker trip is indicated by the white
button protruding approximately 3/8” out from the
housing. To reset, correct the source of over current
and push the white button back in.
Wiring Diagrams–
Receptacle Box Wiring
Green Wire (ground):
green screw
White Wire (neutral):
silver screw
Black Wire (line):
brass screw
