DoCash DoCash 2240, User Manual

Page: 14 / 36

14
Replacement of Teflon-impregnated fabric tape,
cutter wire, and heating element
1. Detach the welding plate from the guides.
2. Undo two screws located horizontally from both sides of the
welding assembly.
3. Remove the metallic cover. You will see the contacts of the
conductors.
4. Unscrew three screws and release the conductors.
5. Unscrew two screws from below of the welding assembly.
6. Remove the Teflon tape.
7. Release the cutter and heating tape fastening on both sides of
the assembly.
8. Straighten the heating tape and the cutter from one side in such
a way that they could be released from the fastening.
9. Remove the used heater and cutter.
10. Pass the new heating element into the slot from one side, bend
it and fix with a screw.
11. Pass the second end of the heating element into the slot at the
opposite end of the welding assembly, tighten the heating ele-
ment with pliers so that it fits close to the surface of the weld-
ing assembly, and tighten the second screw.
12. Install the cutter in the same manner.
13. Paste the Teflon tape.
14. Assemble the machine in the way opposite to disassembling it.