DoCash DoCash 2240, User Manual

Page: 10 / 36

10
Operation
Once the machine is unpacked completeness of delivery against the
documents supplied must be checked. Should any discrepancies be
discovered, a report should be made and sent out to your supplier.
How to prepare the machine for operation
1. Remove the machine from its base.
Lift the machine up and remove it from the base. Put the machine on
a flat horizontal surface.
If the surface is inclined, the machine should be levelled. Remove all
protective material like polystyrene foam pieces, paper, hardboard,
etc. from the chamber.
During installation, pay attention to leaving some space around the
machine. This will provide ventilation and avoid overheating.
2. Before starting up the machine, please fill oil into the vacuum
pump.
(See " Oil Pump—Filling with oil")
3. Connect the machine to power supply.
Once it is connected to the system, turn the machine using the main
switch located on the front panel.
Note
The machine is rather heavy.
Note
It is forbidden to use the vacuum packaging machine without oil in
the pump.
In standard delivery, pumps are not filled with oil.
Oil is included in complete set.