©
Copyright 2002 by DOAR Communications Inc. All Rights Reserved. (800) 875-8705
31
DOAR’s Illustrator
DOAR’s Illustrator is used to draw, annotate or position pointers onto information that is
represented on the monitor or screen. Each area of the tablet is described in the following
sections.
Tablet
Input Sources:
These icons or buttons are used to change
video standards. DOAR sets this up at the time of system
configuration, and it usually does not need to be changed.
Pointers:
These icons will set the cursor to a ‘pointer’ type. When
you click the desired pointer with the tablet pen the pointer will be
‘set’ on the screen. You can set the pointer as many times as you
want. In order to turn off the pointer you should choose the
pointer on/off icon.
To position an active pointer:
1.
Position the pointer anywhere on the tablet to make your point. Lightly drag the
tip
across the screen until the active pointer is at the desired location.
2.
Reposition the same active pointer anywhere on the video image to make your second
point, and continue as often as desired.
To anchor a pointer:
1.
Once a pointer type and pointer color is selected and the active pointer has been
positioned, you can anchor the active pointer in its current position. To do this, click the
button on the pen while positioning it on your tablet. The pointer will be anchored, and a
new active pointer will appear on screen identical to the first.
2.
If desired, you can position multiple pointers and anchor them.
