Getting Started (continued)
Setting the Clock
1.
2.
3.
4.
5.
6.
7.
8.
9.
When the recorder is in standby mode , press
SET
and use to scroll
down to
.
Press and Month
digits will start blinking.
Press / buttons to select Month setting.
Press to shift to Day setting. Day digits will blink.
Repeat steps 3 & 4 in setting Hour & Minute.
If you choose 12-Hour mode,
am
/
pm
icon will be turned on and off
respectively while setting.
To select 24-Hour mode, press / repeatedly until Hour digits shows .
You can press and alternately to move to the setting that you want to
change.
Press
SET
or to confirm clock setting until display window shows the
time you have chosen.
Time date
00
00
00
Setting the Alarm
1.
2.
3.
4.
5.
6.
7.
8.
9.
In standby mode , press
SET
button and use to scroll to
menu.
Press button to select the On/Off mode.
Press button to change the flashing
to .
Press button and the time for the alarm will appear and flashing.
Press and buttons to change the alarm time.
Press to set the alarm and the Icon will appear on the display.
System beeps for 30 seconds at set time. You can press button to stop.
To turn off the Alarm, repeat steps 1-3. Then select
to turn off Alarm.
Icon disappears from display window.
ALARM
OFF
ON
OFF
The unit will enter standby mode after powered on or 60 seconds after recording /
message playback.
You can enter standby mode manually by pressing the button after recording /
message playback.
Note:
- 7 -
Basic Operations
Recording Messages
You can record up to 99 messages in each file (A & B). The newly recorded
message is automatically appended to the last recorded message, you can start
recording quickly without searching for the end of the last message.
1. Press
FILE
button for File Folders or .
2. Press
REC
to start recording message.
3. Press to stop recording.
To pause a message during recording
1. Press button to pause a message recording.
2.
blinks on the display window.
3. Press button again to resume recording.
PAUSE
To protect a recorded message with password
1. Select the message number or immediately after your recorded message, press
SET
button.
will appear on the display window.
2. Press button and the
digits will blink.
3. Press to toggle it to .
4. Press to confirm the change.
LOCK Off
Off
On
To playback the protected message, you need the password. See page 12.
To add a recording to a previously recorded message
You can add a recording to the message being played back.
1. During message playback, press
REC
button for 1 second.
2. Press to stop the recording.
The added recording will be placed after the current message and count as a part
of the message.
- 8 -
A
B
Default voice source is microphone, for other voice input source selection. See P.15
