Sunset
User’s Ma
nual
2
Pressing the speed, acceleration button will set the speed at the faster setting.
Pressing the speed deceleration button will slow down the speed.
The controller sets the reverse speed, acceleration and deceleration proportionally and
automatically for your safety.
3.1.5 Joystick
The joystick controls the direction, speed of your power wheelchair. Push the joystick
in the direction you want to go.
Pointing the joystick away from the center position will move the power wheelchair in
the direction where the joystick is pointing.
The forward of the joystick point from the center position, the faster the vehicle will go.
Returning the joystick to its center position will reduce the speed and stop the vehicle
by automatically applying the electromagnetic brakes.
The right or left the joystick is pointing, the power wheelchair will turn the direction
sharply.
After pressing the ON/OFF buttons, allow two seconds to elapse before engaging the
joystick. This is a safety feature to prevent sudden starts.
Gentle operation of the joystick will result in smoother transitions in speed and
direction, while sharp operation of the joystick will result in drastic transitions in
direction and velocity.
3.2 Manual Mode
The motors are designed to engage the electromagnetic brakes when the power
wheelchair is not in use or when the power is OFF. It has a feature to allow the power
wheelchair in manual mode.
Manual mode: the latch mechanism has a gap from the central plane.
Central plane
Latch mechanism-
Internal latch mechanism
(Fluorescence water transfer print)
13
