background image

Sunset 

User’s Ma

nual 

 

 

Place the battery bag with battery on the front and left of power wheelchair main  
frame. 

There are two vertical Velcro passes over the power wheelchair main frame and battery 
bag.  Please paste with Velcro firmly.  Please see Fig. 35. 

Take the horizontal direction Velcro strap and cross over the power wheelchair main 
frame.  Please paste with Velcro firmly.  Please see Fig. 36. 

 

Fig. 34 

Fig. 35 

Fig. 36 

 

 

 

 

2.7.2 Remove the battery 

Please reverse the battery installation processes. 

 

 

 

2.8 Hand Brake 

Always use hand brake while in manual mode. 
The hand brake is pushed to lock, pull to release. 

Fig. 37 

 
 
 
 
 

3. Controller 

 

 

For indoor environment, we recommend that you select the slowest speed setting. 

For outdoor environment, we recommend that you start at the slowest speed and adjust 
to the speed that is comfortable for you to control it safely. 

 

3.1 Controller Panel 

The Controller Panel is a multifunction visual display.  It can provide the information: 

Warning!  Do not connect the battery cable and controller cable 
with wet hands. 

11 

Summary of Contents for Sunset



















Reviews: