DNIPRO M JS-110SF, Manual

Page: 20 / 48

ENG
Jig saw
16
Dear Customer!
Thank you for purchasing Dnipro-M product of innovative design and high quality
workmanship. This product is one of
High Quality Tools
product range that combines
modern design solutions and high performance with extended continuous operational
time. It is our hope that our products will serve you in your work for years to come.
1. DESCRIPTION OF SYMBOLS
Symbols used in this manual focus user’s attention on various possible emergency
situations. Safety symbols and explanations thereof shall be carefully read and understood.
The warnings do not eliminate risks and do not replace appropriate actions to be taken to
avoid possible injury or accidents.
This symbol emphasizes importance of safety regulations, which means In case
anyone concerned ignores this warning symbol, this may cause an accident for user
or others. Adhere to these instructions to avoid risk of injury, fire or electric shock.
Before to start operation, read the relevant section of this user manual.
Sign of compliance with the basic requirements of the European Union safety
standards.
Class II symbol: the design of this device involves double insulation. Its connection to
a grounded socket is not mandatory.
These symbols mean the need for mandatory use of personal
protective equipment when working with the electric tool.
2. DESCRIPTION OF THE EQUIPMENT
The power tool is intended to perform sawing and cutouts in wood, synthetic materials,
metals, ceramic tiles or rubber. It is suitable for making rectilinear or curved cuts with
inclination angle up to 45°.
The JS-110S Jig Saw has a professional electronic system for speed stabilization
«CONSTANT SPEED».
This system improves performance and makes electric tool operation more comfortable.
When you start cutting, thus loading the electric tool, speed of saw rotation is reduced. In order
to increase the machine productivity, electronics uses backup capacity, thereby preventing
speed drop. Thus, stability of operation under load increases, and cutting quality is improved.
Household series. It is recommended to stop the saw after continuous work during
15-20 minutes. Its work can be resumed in 5 minutes. Recommended running
time for the saw shall not exceed 20 hours a week.