DNIPRO M JS-110SF, Manual

Page: 26 / 48

ENG
Jig saw
22
they are grinding to collector, and from ventilation slots of body small parts of
grease may emerge.
6. Check the switch function.
7. If the test was successful, you can start works. Otherwise, consult your dealer or service centre.
Vacuum cleaner connecting (fig. 2)
Jig saw is equipped with a special pipe for connection to a vacuum cleaning machine.
To connect the vacuum cleaner, insert its hose into the pipe.
Saw blade replacement (Fig. 3)
Before to start saw replacement, it is recommended to disconnect the mains
cable from socket.
To replace the saw, you shall:
1. Move anti-splinter guard to upper position.
2. To dismount a saw, it is necessary to turn lever of saw fastening mechanism to the angle
of 90º. The saw shall automatically come out forced by spring of fastening mechanism.
3. To install the saw, it is necessary to turn saw fastening mechanism lever to an angle of
90º. Insert saw until it stops applying some force to deform the mechanism spring.
Release fastening mechanism lever. Make sure that the saw is fixed reliably.
4. Move anti-splinter guard to the bottom position.
1 2 3
Move anti-splinter guard to
the upper position.
Turn fastening mechanism
lever by 90º
Mount/remove the saw
Fig. 3
Fig. 2