D
D
M
M
A
A
T
T
-
-
M
M
A
A
V
V
2
2
2
2
3.
[
INSERT ELEMNT
] Insert the current/entered Clip #
BEFORE
the highlighted element.
4.
[
CUE LIST
] Cues up the list to the first element. Goes to PL (Playlist) mode.
The
time next to it is the countdown time for the whole playlist.
5.
[
SHIFT
] + [
CUE LIST
] Cues the list in Loop mode.
6.
[
SPEED SELECT
] To specify the Slomo Speed of every Playlist element. Press [
SPEED
SELECT
], then move the T-Bar to set speed. Press [
NEXT
] to assign the speed and move to the
next element in the list; press [
ENTER
] to assign the speed and exit Speed Select mode; or press
[
ESC
] to exit Speed Select mode.
CRT is the Clip’s Running Time: Countdown time for the single element.
List = XX, where XX is the playlist Number, 0-11 (12 Lists Total).
LD is the list duration.
CD is the current clip’s duration.
The current element is highlighted.
In PL mode, both playback channels are used to show video of the Playlist.
P1 will always be AIR channel.
P2 is the PREVIEW channel. (ONLY when [
PLAY
] is pressed.)
To Exit PL Mode:
1. Press [
REC
] to switch to EE mode.
2. Press [
RECALL CLIP
] to recall individual clips and go to CP mode.
Switching to Recorder is not allowed in PL mode.
All transport functions are available in PL Mode.
NOTE:
IF Clips or Playlists are deleted on the MAV, they will not be available for playout from
the DMAT-MAV,
EVEN IF
the Clip name or Play Lists appear there.
