DMXking.com
•
JPK Systems Limited
•
New Zealand
0108-700-3.7
8
Utility v1.20 uses
Settings Broadcast
by default which allows node settings to be updated regardless of the network adapter
subnet range. This only works if all detected nodes are firmware v3.0+ and is automatically disabled otherwise.
Unicast single node discovery and configuration is possible by selecting
Advanced | Unicast Poll
and entering the destination IPv4
address then click Search. This will function over routed networks provided a
Default Gateway
has been specified in the node
Network Settings.
All eDMX/LeDMX/ultraDMX PRO nodes provide IGMPv2 Reports necessary to participate in a multicast environment as necessary
for sACN/E1.31 protocol. Sometimes due to network infrastructure issues an IGMP querier is not present and in these situations,
you can opt to have the node generate ongoing unsolicited IGMPv2 Reports.
To change the node Network Settings make applicable changes then click
Update Network Settings
.
Selecting
Firmware Update
will prompt for an appropriate firmware file and upload upon confirmation. A built-in boot loader
permits updating of the eDMX firmware. We do not recommend performing firmware updates over routed networks. Note only
signed encrypted firmware files from DMXking.com can be succes
sfully loaded to ensure you won’t brick your device by accident.
Future firmware releases for this product will be in the form 0108-500-VersionMajor.VersionMinor.enc
PORT TAB
Port Operation Mode: DMX-OUT
