DMXking.com
•
JPK Systems Limited
•
New Zealand
0108-700-3.7
11
NODE REPORT
From firmware v3.3+ each node provides a brief status report indicating DMX frame rate and SYNC status.
Above an eDMX1 PRO reports Port A at 40fps with no synchronization present (Async mode).
ART-NET NODE NAME
The Art-Net protocol supports device naming which can make larger installations more manageable. Both Short Name (17
characters) and Long Name (63 characters) for an eDMX Device can be modified using the
Advanced | Edit Node Name
dialog.
FACTORY RESET
This is a last resort option if for whatever reason incorrect or forgotten device network settings have rendered your device
unusable. A word of warning
–
this function will factory reset
*ALL*
eDMX devices on your network so it’s critical to separate off
the device requiring reset. We recommend directly connecting a computer an
d eDMX device using a network cable so there’s no
chance of additional eDMX devices accidentally being reset too.
Several warnings are presented before the command is sent. This function is not intended for use with eDMX/LeDMX PRO and
ultraDMX2 PRO devices and will not have any effect in firmware 3.0+.
