ArtNet DMX-UNIVERSE 4.1
13
The ArtNet-Parameters
SubNet, Net
and
Port
must be set in the sense of the
ArtNet-Specifications and specify the aim for the DMX-Data.
Use Broadcast
: The DMX-Data are send to all devices within the ArtNet.
Use Unicast
:
The DMX-Data will are send to a specified device with the
within the ArtNet
Unicast IP
Several actions are available for the DMX-Input in the case of a breakdown of the
DMX-Signal (
DMX FAIL
).
NO DATA
- via ArtNet will be no DMX-input received HOLD last DMX
data
- the last data will be retained
CLEAR all DMX channels to 0% - all DMX-channels will be set to 0
SET all DMX channels to 100%
- all DMX-channels will be set to 255
The
Update-Rate
with which the DMX-Input data are outputted can be switched in
several times.
On change data
transferred only the DMX-Input data if these changes, max. every
0,1 seconds.
DMX Framerate
transferred the received DMX-Values as soon as a frame has
finished. So, the frame rate of the incoming DMX-Signal will be used for the Update-
Rate.
