DMX-RELAIS 8
9
DMX-Address
Via the RDM parameter DMX_START_ADDRESS or directly at the device under
menu
A
the start address can be set.
By pressing the buttons or the start address can be set in a arrange of 1 and
512.
If or is pressed held, the start address increases or decreases until the button is
pressed.
A001
A512
Display Switch Off
To avoid disturbing lighting points during the operation, the DMX-RELAIS 8
display can be switched off.
The shutdown can occur manually or automatically.
Manually it takes place via the RDM parameter DISPLAY_LEVEL.
To activate the automatic shutdown the RDM parameter DISPLAY_AUTO_OFF
Is to select or the menu
oFF
directly at the device.
The time, after which the shutdown should take place is to select between 0 and 9
minutes by pressing the buttons or . If 0 is selected no shutdown occurs.
off0
oFF9
The display shutdown is only in the normal operation (permanent applied
DMX-Signal) possible after the set time runs out. If the DMX-Signal gets
lost or a button is pressed at the device the display is switched on and the
passed time is reset.
