DMX-RELAIS 8
10
DMX-Fail Behavior
The
DMX-RELAIS 8
has a DMX-FAIL function keeping the last switching
state (HOLD) or set the predefined switching state to the set value.
In case of DMX fail the behavior can be set via the RDM parameter
DMX_FAIL_MODE or directly at the device in the menu
F.
Using the buttons or the value is set in a range of 0 and 255. If or
is pressed held, the value increases or decreases automatically until the button is
pressed.
If the maximum value of 255 is reached, the hold function is activated by pressing
again. Pressing again the hold function is deactivated again.
F-H-
F255
F000
F000
up to
F255
Use set value (0-255)
F-H-
Hold last switch condition (HOLD)
In case of a power fail the hold switching states are not restored with the
hold function. In this case the switching states are set OFF.