DMT 40169, User Manual

Page: 6 / 20

4
Always check that all external covers and rigging hardware are securely fastened.
Always keep fingers and objects out of the holes in the mounting bracket.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the cable diameter of the extension cords and powercables are sufficient for the
current consumption of the device.
The powercable may not be modified, broken, mechanically strained, pressed together or heated.
The cable insert or the female part in the device must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.
If the external cable is damaged, it has to be replaced by a qualified technician.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the device is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
Never hit the device with a hammer or other tools, as this may lead to damages.
Make sure that this product is recycled at the end of its life to protect our environment.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your DMT device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your DMT dealer for service.
For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Media Spinner. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
For replacement use fuses of same type and rating only.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The maximum ambient temperature
t
a
must never exceed 40º C.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the
warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!