DMP Electronics Thinline 7463, Installation And Programming Manual

Page: 29 / 40

Digital Monitoring Products, Inc. | 7400 Series Thinline™ Keypad Installation and Programming Guide 25
All/Perimeter System Arming and Disarming
Present the card to the reader or press CMD , the keypad displays DISARM? or PERIM
ALL
(when arming). Press the select key under the desired option. The keypad displays
ENTER CODE: - . Present the card to the reader. Once validated by the system, the selected
areas arm or disarm automatically.
Home/Away System Arming and Disarming
Present your card to the reader. If the system is armed, once the card is validated, all areas
are disarmed and the keypad displays ALL SYSTEM OFF . If the system is disarmed when
you present your card, once the card is validated, HOME SLEEP AWAY displays. Manually
select
HOME
,
SLEEP
,
AWAY
or after a short time-out, all areas automatically arm in the
AWAY mode.
The system arms or disarms the areas
on the 7463 keypad.
PERIM ALL
Figure 8: All Perimeter Arming and Disarming