20
7400 Series Thinline™ Keypad Installation and Programming Guide | Digital Monitoring Products, Inc.
Require Site Code
Press the top row select key or area under
YES
to use a site
code and press
CMD
to view the site code entry display. Press
NO
to advance to
NO OF USER CODE DIGITS
. Default is
NO
.
In addition to user code verification, door access is only
granted when any one site code programmed at the
SITE CODE ENTRY
option matches the site code received in
the Wiegand string.
Number of User Code Digits
The keypad recognizes user codes from 4-12 digits long.
Press any top row select key or area to enter a user code digit
length. This number must match the user code number length
being programmed in the panel. The device will recommend
a number of user code digits based on the user code length.
Default is
5
.
All bits are read and converted into a decimal number string.
The number string is left padded with 0 (zero) if needed for
long user code lengths.
Example:
# decoded
1234567
10
digits
0001234567
4
digits
4567
REQUIRE SITE
CODE:
NO
YES
NO OF USER CODE
DIGITS:
5
Summary of Contents for Thinline 7463
Page 2: ......
Page 39: ......
Page 40: ...LT 2006 1 01 20113 2020 Digital Monitoring Products Inc...
