Digital Monitoring Products, Inc. | 7400 Series Thinline™ Keypad Installation and Programming Guide
13
Initialize Confirm Option
The module displays
SURE? YES NO
for confirmation to
clear the memory. This is a safeguard against accidentally
erasing the programming. No memory is cleared from the
programming until you answer
YES
to the
SURE?
option.
Selecting
NO
leaves communication options unchanged.
Current Keypad Address
Set the current keypad address from 01 to 08 for XR150 Series
panels or 01 to 16 for XR550 Series panels. The default address
is
01
. To change the current address, press any select key
and enter the new address. Do not enter a leading zero for
addresses 01 to 09.
7400 DHCP
Select
YES
to use dynamic IP address information for the
module’s IP Address, Subnet Mask, and Gateway Address.
Select
NO
to enter static IP information.
7400 IP Address
Enter the static IP address of the keypad if the DHCP is set to
NO
. Default is
192.168.0.201
.
INITIALIZE ALL?
SURE? YES NO
CURRENT KEYPAD
ADDRESS:
1
7400
DHCP? NO YES
7400 IP ADDRESS
192.168.0.201
Summary of Contents for Thinline 7463
Page 2: ......
Page 39: ......
Page 40: ...LT 2006 1 01 20113 2020 Digital Monitoring Products Inc...
