DMP Electronics Aqualite 7060A Installation Manual Download Page 22

Page: 22 / 28

LCD Keypad Installation Guide

User’s Guide

This User’s Guide covers 7063/7063A, 7073/7073A, and 693/793 keypads and

contains three different sections: Keypad Arming and Disarming, Keypad Door

Strike, and Keypad Entry Delay. All of the examples displayed assume that

CLOSING CODE is YES in panel programming.

Note

: Figures 9 through 12 show the user presenting their card to the keypad.

When an external reader is connected to a 7073/793A or 793 keypad, the user

presents their card to the reader rather than to the keypad.

Keypad Arming and Disarming

Area system Arming and Disarming

Press COMMAND, the keypad displays ARM DISARM. Press the Select key under

either option. The keypad displays ENTER CODE: -. Present your card to the

keypad or to an external reader connected to the 7073/7073A or 793 keypad.

Once validated by the system, all areas assigned to your code arm or disarm

automatically and the 7073/7073A or 793 keypad Door Strike relay activates.

ABC SECURITY

ARM DISARM

ABC SECURITY

ENTER CODE:

–

ABC SECURITY

ALL? NO YES

Select NO to arm or disarm individual areas.
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.

Figure 9: Area Arming and Disarming

All/Perimeter System Arming and Disarming

Present your card to the reader or press COMMAND, the keypad displays

DISARM? or PERIM ALL (when arming). Press the Select key under the desired

option. The keypad displays

ENTER CODE: -. Present your

card to the reader. Once

validated by the system,

the selected areas arm or

disarm automatically. On

7073/7073A or 793 keypads,

the Door Strike relay then

activates.

PERIM ALL

DISARM?

The system arms or disarms the areas and
activates the door strike relay on the 7073, 7073A or 793 keypad.

Figure 10: All Perimeter Arming and Disarming

Summary of Contents for Aqualite 7060A





























Search results

Summary of Contents for Aqualite 7060A

Reviews:

Related manuals for Aqualite 7060A

Brands by name

Popular brands

DMP Electronics Aqualite 7060A, Installation Manual

Search results

Summary of Contents for Aqualite 7060A

Reviews:

Related manuals for Aqualite 7060A

Brands by name

Popular brands