DMP Electronics Aqualite 7060A Installation Manual Download Page 20

Page: 20 / 28

LCD Keypad Installation Guide

Accessing Keypad Diagnostics

If necessary, refer to Access the Installer Menu earlier in this document.

KPD KPD

OPT DIAG

STOP

Keypad Diagnostics (KPD DIAG)

The Keypad Diagnostic option allows you to

check the display segments, check the keyboard

backlighting, and test individual keys.
Press the Select key under KPD DIAG. The keypad

lights all display segments and illuminates the

keyboard in green. A few seconds later the keypad

turns the display off and illuminates the keyboard

in red. The keypad then alternates between these

two states for approximately two minutes. Press

COMMAND at any time to continue.

PRESS KEY TO

TEST

Test Individual Keys

The display changes to PRESS KEY TO TEST. This

option allows you to test each key on the keyboard

to ensure it is operating properly. Press and hold

each key for about two seconds. The key number

being held appears in the display. Verify the

correct number displays before testing the next

key.

Z1 OPEN Z2 OPEN
Z3 OPEN Z4 OPEN

Zone Test

(7063/7063A, 7073/7073A, 693/793 only)

This option allows the keypads to display the

current electrical status of the four protection

zones. The status is shown as OPEN, SHRT, or OKAY.

Note

: The Zone Test displays on 7060 and 7063

keypads, but is not operational.

INPUT WIEGAND

Input Wiegand

(7063/7063A, 7073/7073A, 693/793 only)

This option tests the internal and external reader

input from proximity credentials. The display

shows OKAY each time a good proximity read is

received.

Exiting the Installer Options

When done, press the COMMAND key once to return to the Installer Options

screen. Press the Select key under STOP to exit the Installer Options function.

Summary of Contents for Aqualite 7060A





























Search results

Summary of Contents for Aqualite 7060A

Reviews:

Related manuals for Aqualite 7060A

Brands by name

Popular brands

DMP Electronics Aqualite 7060A, Installation Manual

Search results

Summary of Contents for Aqualite 7060A

Reviews:

Related manuals for Aqualite 7060A

Brands by name

Popular brands