DMP Electronics 7800 Series Installation And Programming Manual Download | Manualshive

Page: 15 / 60

background image

Digital Monitoring Products, Inc. | 7800 Series Installation and Programming Guide

11

Wire the Electronic Lock

7873/7873H keypads provide a Form C (SPDT) relay for controlling locks and other

electronically-controlled barriers. The Form C relay draws up to 15 mA of current and

the contacts are rated for 1 Amp at 30 VDC maximum, resistive. The wires marked NO

C NC allow you to connect the device wiring to the relay for module control. Use an

additional power supply to power magnetic locks and door strikes. See Figure 8 and

Wire the 333 Suppressor

Use the included 333 suppressor with the keypad to suppress any surges caused

by energizing a magnetic lock or door strike. Install the 333 across the keypad C

(common) and NO (normally open) or NC (normally closed) wires.
If the device being controlled by the relay is connected to the NO and C wires, install

the suppressor on the NO and C wires. Conversely, if the device is connected to the

NC and C wires, install the 333 Suppressor on NC and C wires. See Figure 8 and

4

5

«
...
13
14
15
16
17
...
»

Summary of Contents for 7800 Series





























































Reviews:

No comments

Related manuals for 7800 Series

GEM-RP1CAE KEYPAD

Brand: NAPCO Pages: 36

Brand: AAA Alarms Pages: 8

Brand: AuCom Pages: 4

Brand: Targus Pages: 5

Numeric Keypad with 2 USB ports

Brand: Targus Pages: 7

Brand: Carlon Pages: 2

Brand: RSI VIDEO TECHNOLOGIES Pages: 5

Brand: Guardall Pages: 20

Brand: G.S.M Activate Pages: 5

Invision CV-920 Series

Brand: CAMDEN Pages: 5

Brand: Eaton Pages: 4

Brand: Eaton Pages: 44

AMX FG2102-06L-BL

Brand: Harman Pages: 43

Brand: Abus Pages: 17

Brand: AUREL Pages: 2

ergo-X KSI2100031.302

Brand: Ksenia Pages: 10

Brand: LEGRAND Pages: 2

Brand: Renkforce Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands