DMP Electronics 736P Radionics, Installation And Programming Manual

Page: 29 / 40

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 25
Test the Module
Perform a Standard Walk Test to confirm that all of the modules are
communicating with the 736P and the 736P is communicating with the
panel.
1. Reset the panel.
2. At a keypad, enter
8144 (WALK) and select STD .
3. Trip each zone on the system. The keypad will annunciate each time a
zone is tripped and display the number of zones successfully tripped.
4. Press the fourth select area or key to end the walk test.
5