27
END USER TRAINING
This section covers 7063/A, 7073/A, 7163, and 7173 keypads and contains three sections:
•
Keypad Arming and Disarming
•
Keypad Access Control
•
Keypad Entry Delay
All of the examples displayed assume that
CLOSING CODE
is
YES
in panel programming.
Figures 11 through 14 show the user presenting a card to the keypad. When an external
reader is connected to a 7073/A and a 7173 keypad, the user presents a card to the reader
rather than to the keypad.
Keypad Arming and Disarming
Area System Arming and Disarming
1.
Press
CMD
until the keypad displays
ARM DISARM
.
2. Press the select key under the preferred option.
3. The keypad displays
ENTER CODE: -
. The user presents their card to the reader.
Once validated by the system, all areas assigned to that code arm or disarm
automatically and the 7073/A and 7173 keypad door strike relay activates. See Figure 11.
Figure 11: Area Arming and Disarming
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE:
–
ABC SECURITY
ALL? NO YES
Select NO to arm or disarm individual areas.
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.
