Digital Monitoring Products, Inc | 7000INT Series Installation and Programming Guide
13
PROGRAM THE KEYPAD
Refer to the appropriate panel programming guide as needed. Keep in mind that
operation for some programming options is restricted to the appropriate model. To
program a keypad, access the Installer Options menu by pressing and holding the
CMD
and
back arrow
keys at the same time for two seconds. At
SET BRIGHTNESS
, enter
3577
(INST) and
CMD
for XR150INT/XR550INT Series panels or enter
357
and
CMD
for
XT30INT Series panels.
KEYPAD OPTIONS
Keypad Options
To program keypad options, press the select key under
KPD OPT
.
Current Keypad Address
Set the current keypad address from 01 to 08 for XT30INT
or XR150INT Series panels, or 01 to 16 for XR550INT Series
panels. The default address is set at 01. To change the
current address, press any select key to clear the keypad
display, enter the new address, and press
CMD
. Do not enter
a leading zero for addresses 01 to 09.
KPD
KPD
OPT
DIAG
STOP
CURRENT KEYPAD
ADDRESS: 1
Summary of Contents for 7000INT Series
