② / ③ ④
① ② / ③
More than 1 second
More than 1 second
0.5s
More than 1 second
― 14 ―
― 13 ―
4-9-2 Start/Stop Data Logging
The Meter supports multi-session data-logging. Multiple
functions can be logged one-at-a-time into the meter's free
memory up to 999 separate session-pages without erasing
the formerly logged one(s).
Then press the
button to start a new logging session
directly without erasing the formerly logged one(s). Or you
can press the
▼
button to erase ALL of the formerly logged
session-page(s), and start a new logging session from the
very first session-page (P.001) with maximum meter memory.
The bar-graph turns to a swinging pointer when data-logging
mode is running.
Press
button for 1 sec. or more to start the data-
logging mode. “LEFt” displays momentarily followed
by a number to indicate the memory points left for new
logging session(s). (Sub / main displays for most-
significant / least-significant numbers separately.)
When the number of logged data reaches the loggable max
value,
will be indicated and the logging ends. If you
need the logged data in the internal memory, transfer the
data to your PC and save them. (See 4-8 on the page 11.)
To start a new logging session, erase the past logged data.
Below example illustrates 43,102 memory points are available
for new logging session(s).
