― 60 ―
― 59 ―
5-11-4 Temperature probe: T-300PC
1) What to measure
Temperature of liquid, solids, gas, and etc.
Note:
To make temperature measurement, connect the temperature
probe to the PC720M connected to the PC on which sanwa's
software PC Link7 is installed and running.
2) Measuring range
-50
〜
300
℃
'00UDQJHN
3) Measuring procedure
①
Connect the red plug of the temperature probe to
measuring terminal and the black one to the COM terminal.
②
Set the function selector to
and press the SELECT button
WRVHOHFW>@
③
3UHVVWKH5$1*(+2/'EXWWRQWRVHWN
④
Apply the thermocouple to the object to measure.
⑤
Read the measurements on the information window of the
PC Link7.
⑥
Remove the thermocouple from the object.
5-11-5 Other separately available products
The meter also works with the following separately-available
products.
LS11, K-AD, CL124, CL140, K-8-250, K-8-300, K-8-500, K-8-650,
K-250PC/K-250CD, and K-8-800
5-11-3 DC Clamp probe: CL-33D
(Max. measurable current 300 Adc)
1) What to measure
Current of automotive electric circuits, consumption current of
DC equipments, etc.
2) Measuring ranges
30 A and 300 A
3) Measuring procedure
①
Connect the red plug of the current probe to the V measuring
terminal and the black one to the COM terminal.
②
Set the function selector to
and press the SELECT
button to select m , then press the RANGE button to set
600.0 mV range.
③
Set the range selector knob on the current probe to the 30 A
range or 300 A range.
*Before making DC current measurement, turn the Center
Adjuster knob to make the reading zero.
④
Open the clamp jaws of the clamp probe and clamp the wire
to measure.
⑤
Multiply the reading by 0.1 for 30 A range, and read the
display directly for 300 A range.
Note:
・
Current exceeding 30 A or 300 A cannot be measured.
(Do not measure such high current even though the display works.)
・
Try to put the wire to measure in the center of the clamp jaws as
possible.
