A S S E M B LY I N S T R U C T I O N S :
1.
Open your rollator. Push the folding
hinges down until they lock securely in
place on both sides. They are located
under the folding seat.
2.
Place both loose hand pieces, with the
pre-assembled locking loop brakes, into
the handlebar openings and adjust to
the desired height. To do this, remove
the knob, washer and screw from the
handlebar and insert the screw, with the
washer on it, through the desired hole
aligned in the rollator bar and screw the
knob back on securely.
3.
Insert removable backrest into rollator
frame securely by making sure the
retainer pins are locked into position
through the frame holes on both sides.
4.
Test and adjust the tension on the
braking system mechanism to ensure
proper and secure braking before use.
5.
If your rollator comes with a basket,
secure the basket in the proper
location. Flip up seat and place basket
on rollator crossbars.
WARNING!
It is very important that you read all instructions
before assembly and/or use of this Rollator.
Before using the rollator, be sure your weight is within the
weight capacity of the unit. This rollator will require little or no
assembly and can be performed without tools.
Parts of Assembly:
2 Handlebars with Loop Lock Brakes; 1 Basket; 1 Backrest
I N S T R U C T I O N S
F O R A S S E M B LY
2
1
4
3
S P E C I F I C A T I O N S
Basket:
20” x 8” x 6” deep
Wheels:
8”
Overall Width
: 30.5”
Width Between Handles:
22”
Handle Height:
35” - 39”
Seat:
18” x 13.25”
Seat Height:
22”
Weight:
28 lbs.
Weight Capacity:
375 lbs.
5
I T E M # 5 0 1 - 1 0 3 2 S E R I E S
