Initiate a warning of some type (Tornado, Earthquake, Etc.) from the Sage-Endec
front panel. (This cannot be done from the Ultimate Remote Control). Again the LCD
sign will display the warning message and the strobe will flash orange. Clear the
sign on the Ultimate Remote Control.
Initiate an Alert (CAE, etc.) from the Sage-Endec front panel. (This cannot be done
from the Ultimate Remote Control). Again the LCD sign will display the warning
message and the strobe will flash red. Clear the sign on the Ultimate Remote
Control.
In order to test the Pending Alert functions it will take receipt of an actual alert and
the inputting of alert audio from another EAS encoder. This is done by connecting
the MAIN/ALERT XLR output from another unit to either the “Monitor 1” or “Monitor
2” input and the audio common terminals of the Sage-Endec under test and initiating
an alert from the other unit. You will then be able to release the pending, kill the
pending and preview the audio functions. The audio functions can be tested either
using the speaker or earphones. Just turn on the audio by rotating the gain control
clockwise to a comfortable level. Note that the audio is enabled only when the
Preview Audio button is pressed. This is a timed and self muting function, and turns
off 5 seconds after the audio has ended.
Warranty Information:
The Ultimate Remote Control and Automation Interface Module are warranted for a
period of one year from the date of purchase. This warranty covers materials and
workmanship only. Any misapplication, physical or electrical damage from outside
sources or by the customer is not covered. The customer must pay shipping costs to
the factory, and DME will pay shipping costs to return the warranted equipment to
the customer. Any priority shipping costs are to be the responsibility of the customer
as ground service is standard. Please contact the factory for an RMA number prior
to any returns. Items returned without an RMA may be sent back to the customer
unopened.
Technical Support :
If you have questions, experience difficulties with the product or require further
information please contact DME at: 805-987-7881 or 800-249-0487, Contact
technical support at: [email protected] or visit www.DMEngineering.com
for the latest User Guide.
Specifications:
Case Dimensions (Remote Control): 8.4" wide X 4.3" deep X 1.2" high Case
Dimensions (Interface Module): 3.5’ wide X 3” deep X 1” high Remote Control
Case Material and Color: styrene plastic, light grey
LCD Display Dimensions: 6 1/16 X 5/8
Character Size: .453 X .265
LCD Display: Yellow Backlight
8
