3
Notes:
1.
The appliance inlet of the power supply is the disconnector from mains and must be anytime easily
accessible.
2. The maximum noise level of the product is L
PA
≤
70dB (A) DIN 45635-19-01-KL2.
1.
Der Gerätestecker des Netzteilesbildet die TrennvorrichtungzumVersorgungsstromkreis und
mußjederzeitleichtzugänglichsein.
2.
Max. Geräuschpegel: L
PA
≤
70dB (A) DIN 45635-19-01-KL2.
FCC Information
This equipment generates and uses the radio-frequency energy and, if not installed and used in accordance
with the instruction manual, may cause interference to radio and television reception. It has been tested
and found to comply with the limits for a class A computing device in accordance with the specifications
in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. If this equipment does cause interference to
radio or television reception, the user may try to correct the interference by one or more of the following
measures:
1.
Re-orient the receiving antenna for the radio or television.
2.
Relocate the equipment with respect to the receiver.
3.
Plug the equipment into a different outlet so the equipment and receiver are on different branch
circuits.
4.
Fasten cables using mounting screws to ensure adequate electromagnetic interference controls.
Acknowledgments
The followings are registered trademark or trademarks of their respective corporations: Google,TI, Microsoft etc.
Safety Information
Please read these instructions before using your Pico Projector. Failure to comply with these instructions could
result in electric shock, fire, personal injury or damage to your Pico Projector.
Power Source
Check the power specification plate on the back of the Pico Projector. Ensure that your line voltage matches with
the power adapter rating of the Pico Projector.
The Power Adaptor accepts AC power 90-264V, 50-60 Hz.
Power Adaptor
Use only the power adaptor supplied with the Pico Projector. Do not use the power adaptor if it has become
damaged or frayed. For a replacement power adaptor, contact your authorized dealer.
Do not allow anything to rest on the power adaptor. Do not place this projector where the adaptor may be abused
by persons walking on it.
