Hitachi CP-RX60 Series User Manual Download

Page: 1 / 67

Projector

User's Manual – Operating Guide

CP-RX60

Thank you for purchasing this projector.

WARNING

►Before using, read the "User's Manual - Safety Guide" and

these manuals to ensure correct usage through understanding. After reading,

store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could result

possibly in personal injury or physical damage due to incorrect

handling.



Please refer to the pages written following this symbol.

NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transmission or use of this document or contents is not permitted without

express written authority.

Trademark acknowledgment

• VGA and XGA are registered trademarks of the International Business Machines

Corporation.

• Apple and Mac are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• Internet Explorer is a trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Summary of Contents for CP-RX60 Series




































































Search results

Summary of Contents for CP-RX60 Series

Reviews:

Related manuals for CP-RX60 Series

Brands by name

Popular brands

Hitachi CP-RX60 Series, User Manual

Search results

Summary of Contents for CP-RX60 Series

Reviews:

Related manuals for CP-RX60 Series

Brands by name

Popular brands