13
Cleaning the Pico Projector Housing
DO NOT
try to service the Pico Projector. Refer all Pico Projector servicing to your
dealer. Failure to do so can result in serious personnel injury or damage to the Pico
Projector.
DO NOT
clean the housing with organic solvents, such as those containing acetone.
Wipe the exterior of the housing with a soft, damp cloth. Protect the Pico Projector
from rain, snow or extreme temperature.
Cleaning the Projection Lens
To clean the projection lens:
Use a cotton-bud stick to gently wipe dust or oil from the projection lens surface. Also,
do not use abrasive cleaners, solvents, or other harsh chemicals that might scratch the
lens.
Transporting the Pico Projector
The DLP Pico Projector is a highly sophisticated piece of electronic equipment that is
sensitive to impact, excessive heat, cold and humidity. When transporting the Pico
Projector, use a protective bag or use the original packing carton to minimize shock and
impact.
Store and transport the Pico Projector at temperature between 0 and 140 degrees
Fahrenheit (-17 to 60 degrees Centigrade). Avoid storage in automobiles during
seasonal temperature extremes. Automobile interior temperatures can exceed 160
degree Fahrenheit (70 degrees Centigrade) in summer. If the Pico Projector has been
exposed to extremely hot, cold or humid conditions, allow it to stand at room
temperature for 30 minutes before use. Extended use of the Pico in high temperature
environments may cause a reduction in brightness of the projected image.
Troubleshooting Guide
If you are having a problem operating the Pico Projector, first make sure you have set it
up according to the instructions in the Section on
Setting Up the Pico Projector
. You
