DLP Design USB-Parallel FIFO Module DLP-USB245R, User Manual, Page: 2 / 13

Share

1
2
3
4
5
6
7
8
9
10
11
12
13

Page: 2 / 13

DLP Design USB-Parallel FIFO Module DLP-USB245R User Manual Download Page 2

Rev. 1.0 (November 2008) 2 © DLP Design, Inc.

APPLICATION AREAS:

• Upgrading legacy peripherals to USB
• Interfacing MCU/PLD/FPGA-based designs to USB
• USB audio and low-bandwidth video data transfer
• PDA-to-USB data transfer
• USB smart card readers
• USB instrumentation
• USB industrial control
• USB MP3 player interface
• USB FLASH card readers and writers
• Set top box PC-USB interface
• USB hardware modems
• USB wireless modems
• USB bar code readers
• USB software and hardware encryption dongles

DRIVER SUPPORT:

Royalty-Free Virtual COM Port (VCP) Drivers for:

• Windows 98, 98SE, ME, 2000, Server 2003, XP and Server 2008
• Windows XP and XP 64-bit
• Windows Vista and Vista 64-bit
• Windows XP Embedded
• Windows CE 4.2, 5.0 and 6.0
• Mac OS 8/9, OS-X
• Linux 2.4 and greater

Royalty-Free D2XX Direct Drivers (USB D DLL S/W Interface) for:

• Windows 98, 98SE, ME, 2000, Server 2003, XP and Server 2008
• Windows XP and XP 64-bit
• Windows Vista and Vista 64-bit
• Windows XP Embedded
• Windows CE 4.2, 5.0 and 6.0
• Linux 2.4 and greater

The drivers listed above are all available for free download from the DLP Design website

www.dlpdesign.com

and FTDI website

www.ftdichip.com

.

Various third-party drivers are also available for other operating systems; see the FTDI website

www.ftdichip.com

for details.

«
1
2
3
4
...
»

Summary of Contents for USB-Parallel FIFO Module DLP-USB245R














Reviews:

No comments