DLI 9200 PRODUCT MANUAL
PAGE 26/39
Rev. 3
SIM Card Insertion
The SIM Card Slot is located in the back of the unit under a user accessible case cover. To
access, remove back case cover (two phillip screws) then remove the plate cover (two phillip
screws). The SIM Card Slot is intended for use of the MC8790 (GPRS Wireless Radio)
ONLY
.
If you are unaware of what type of WWAN Radio you have please contact DLI Technical Support;
(800) 526-1299 x774 or
.
The unit must be power down prior to inserting the SIM card. Failure to do so
may result in harm to the unit and the SIM.
Back Panel
Using the RS-232 DB9M
The integrated RS-232 Port can be configured to work with many peripherals including Barcode
Scanners, Printers, ODBII (Vehicle Interface), and Remote Monitoring apparatuses. To configure
the RS-232 port so that the data is sent to the keyboard buffer the following procedure is required.
This procedure is typically used when using an external barcode scanner on the device.
All DLI Devices have power to Pin 9.
DO NOT plug-in or unplug any serial devices while the DLI Device is powered on!
Bottom Panel
Pin Description
1
DCD
2
TXD
3
RXD
4
DSR
5
GND
6
DTR
7
CTS
8
RTS
9
+5V
Serial
Port
1 2 3 4 5
6 7 8 9
SIM Slot Door
Summary of Contents for 9200
Page 1: ...Rev 3 Product Manual ...
