INSTALLATION
-------------------------------------------------------------------------------------------------------------------------
Before Installation
Before installing the camera, thoroughly familiarize yourself with the information in this section of the manual.
- Recommends connecting the camera to a network that use a DHCP (Dynamic Host Configuration Protocol)
server to address devices.
- To ensure secure access to the IP camera, place the camera behind a firewall when it is connected to a
network.
Starting Installation
Base Installation
1.
Make mounting holes and cable hole in the place (ceiling) to which this dome camera is installed using the supplied template sheet.
NOTE
The total mass of the main unit is approx 1.3kg. Check whether the ceiling to which the Dome Camera is installed is strong enough to
hold the unit mass. If not, the Dome Camera could fall, causing injury.
Figure 1. Mounting Hole
2. Attach the safety wire for securing the dome camera to ceiling or structure not to fall.
3. Extract each wire through the cable hole, connect BNC cable and communication lines.
4. Unlock torx screws (4x) the dome cover and fix the dome case firmly with supplied mounting screws (4x), plastic
anchors (4x), O-Rings (4x).
5. Adjust desired focus and scene by turning and moving the hemisphere by hand.
6. Lock the housing cover with torx screws (4x).
Figure 2. Lock Screw
8
