< PRIVACY setting>
Use the Privacy Mask tab for aiming at the protection of personal privacy.
Mode:
Select an ON mode for Privacy Mask function.
--
Off:
Not in use.
--
On:
Set and Use the P-Mask function.
1. Select an ON mode and click the Save button. Then P-Mask OSD windows will be appears.
2. Click the Enter button for PRIVACY SETUP OSD menu.
-- Color R/G/B:
You can make any color by adjusting R.G.B level.
--TRANSPARENCY:
You can adjust the transparency of MASK.
-- REC/CIR/POL
-- RECTANGLE
1. Use [Left Direction] or [Right Direction] button to select a mask on the [MASK NUMBER].
2. Use [Left Direction] or [Right Direction] button to set up the [ON] or [OFF] on the RECT.DISPLAY option.
3. Use [Upper Direction] or [Lower Direction] button to select an option then use [Left Direction] or [Right Direction]
button to adjust the option.
- HEIGHT: Increase or decrease the vertical size of the mask.
- WIDTH: Increase or decrease the horizontal size of the mask.
- MOVE X: Moves horizontal position of the mask.
- MOVE Y: Moves vertical position of the mask.
-- CIRCLE
1. Use [Left Direction] or [Right Direction] button to select a mask on the [MASK NUMBER].
2. Use [Left Direction] or [Right Direction] button to set up the [ON] or [OFF] on the CIR.DISPLAY option.
3. Use [Upper Direction] or [Lower Direction] button to select an option then use [Left Direction] or [Right Direction]
button to adjust the option.
- HEIGHT: Increase or decrease the vertical size of the mask.
- WIDTH: Increase or decrease the horizontal size of the mask.
- MOVE X: Moves horizontal position of the mask.
- MOVE Y: Moves vertical position of the mask.
- RADIUS SIZE: You can adjust the RADIUS SIZE.
-- POLYGON
1. Use [Left Direction] or [Right Direction] button to select a mask on the [MASK NUMBER].
2. Use [Left Direction] or [Right Direction] button to set up the [ON] or [OFF] on the POLY.DISPLAY option.
3. Use [Upper Direction], [Lower Direction], [Left Direction], [Right Direction] and [Enter] buttons to draw the polygon
by moving each vertex on the [POLYGON DRAW]. Each movable spot each time you can click the [Enter] button.
4. Use [Upper Direction], [Lower Direction], [Left Direction], [Right Direction] and [Enter] buttons to move the polygon
on the [POLYGON MOVE].
< SPECIAL setting>
Implement various functions.
--
D-ZOOM
: You can select the digital zoom level.
--
D-EFFECT
: You can select the digital effect.
--
SHARPNESS
: The degree to which boundary of the two portions is clearly distinguished.
--
COLOR
: You can switch the displayed picture to gray scale or color.
--
STABILIZER
: The image stabilizer function minimizes the appearance of shaky images
caused by low-frequency vibration.
This function is useful for outdoor surveillance.
Select the [STABILIZER] option and set to ON or OFF.
Note:
If you set the [STABILIZER] to ON, the Digital zoom is set to [x1.1] automatically.
--
USER TITLE
: You can use the camera identification to assign a number and character
to the camera(0 to 9, A to Z, a to z).
To disappear the user title, select [OFF].
15
