NOTES
- If you set [Shutter speed] to Auto, then the [WDR] and [SENS-UP] are available.
- If you set [Shutter speed] to AntiFlk, then the [WDR] is available.
- In Shutter speed mode, the [WDR] and [SENS-UP] are not available, except that the mode is Auto or AntiFlk.
- Sens-Up:
If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture.
--
Off:
Not in use.
--
Auto:
Adjust the sensitivity of the picture automatically.
-Sens-Up level:
Select the Sense-Up level (x2 to x64).
<White Balance
setting
>
White Balance Control defines how the camera processes video images to render true colors in a scene. White balance
is especially effective in scenes with changing lighting conditions or in scene with more than one type of light source.
White balance mode:
Provides the options for White Balance. The default setting is ATW.
--
ATW:
Auto-Tracking White Balance. In this mode, white balance has better coverage than AUTO.
Proper white balance may not be obtained under the following condition.
> When the scene contains mostly high color temperature objects, such as a blue sky or sunset.
--
Auto:
Set the white balance mode automatically.
--
AWC_PUSH:
Auto White Balance Control. If you select this mode, you will be able to set up the White
Balance by push triggered white valance in fixed mode.
--
Manual : You can set the white balance options manually.
>
Color TEMP:
use right or left button to select a function.
Indoor:
Set the white balance options manually. The color temperature range for the white balance is
approximately 3200K.
Outdoor:
Set the white balance options manually. The color temperature range for the white balance is
approximately 5100K.
>
RED :
set desired red value.
>
BLUE :
set desired blue value.
<Day & Night setting>
The D&N controls the position of the IR (Infra Red) cut filter, which determines the color or black-white setting of the
camera.
Day & Night mode:
Select a mode for DAY/NIGHT function.
--
Auto:
Day & Night mode changes automatically.
--
Day:
Color mode enabled.
--
Night:
Black-and-white mode enabled.
--
EXT:
This menu automatically converts the COLOR Mode into the B/W Mode or vice versa depending on
illumination with an external sensor.
< Motion DET setting>
When motion is detected in the area of setting an alarm signal is output
MOTION DET OFF/ON :
Select a mode for M. ON / M. OFF function.
--
ZONE NUMBER
: Select a motion for area.
--
ZONE STATE
: Select a range of motion display box
--
HEIGHT/ WIDTH:
motion display box scaling
--
MOVE Y/ MOVE X
: motion display box Move.
--
SENSITIVITY
: Action sets the sensitivity.
< 3D-DNR setting>
3Dimensional-Digital Noise Reduction function dramatically cleans up the noise in video frames and solves the problem
of low- light sensitivity where it can display high image resolution even in extremely low light conditions.
Level:
Select one of the 3D-DNR levels.
--
Off:
Not in use.
--
High:
Select a High level.
--
Middle:
Select a Middle level.
--
Low:
Select a Low level.
14
