15
Radeberger Str. 21; 01900 Großröhrsdorf
Tel. / Fax. 0049 35952- 429465 /- 429457
E-Mail:
; www.dks-engineering.de
If the test is negative, the relay "maintenance requirement" is activated and it can be decided
whether to switch to the coating mode ( yes ), or to measure further ( no ). In this case, the
service icon remains active:
If confirmed with "yes", the operator receives an indication of possible dangers. At the same
time, the voltage on the sensor is switched off, the analog output switches to "sample and
hold", the last measured value is displayed on the display (here 50.6 ppm) and the relay
"Maintenance" is activated. The sensor is cleaned and the success is checked with "ok".
