DKL CHAIRS L2-ECO, Operating Instructions Manual, Page: 40 / 266

40
1
2
1
2
The Bottle Care System is a treatment water system for the self-suffi cient water supply for all the
instruments and the glass fi ller. There is also the possibility of intensive decontamination of the
service water lines in the treatment unit.
Bottle Care System
Use the bottles before their expiration date (see bottle). Replace the bottles at the
latest if they show visible damage or when they reach their expiration date – otherwise
they might burst!
Changing the treatment water bottle on the outside of
the doctor‘s device or on the cuspidor (depending on
the version):
1. Set the fl ip switch (1) on the bottle holder to „off “.
Turn the treatment water bottle (2) slightly to the left
until the ventilation becomes audible.
2. Remove the treatment water bottle (2) from its holder
from the left-hand side. Fill the bottle and then turn it
clockwise into the bottle holder.
3. Set the fl ip switch (1) on the bottle holder to „on.“
The water supply is ready for operation.
Empty the treatment water bottle at the end of a working day and refi ll the bottle at
the beginning of a working day (after initial rinsing 120 sec. RKI) with fresh operating
water and DK-DOX 150 Chlorine Dioxide ready-to-use solution (1 ampoule per liter).
Only use bottles approved by DKL.
To maintain the water quality in the Bottle Care System of DKL dental units.
CONTENT
• 30 x 5 ml glass ampoule of chlorine dioxide solutio
• 1 x ampoule opener
APPLICATION
Open a 5 ml glass ampoule of chlorine dioxide solution using the ampoule opener and dispense it
into the bottle of the Bottle Care System per 1 litre of water.
Product number: 590013
https://dkl.de/en/DK-DOX150-Clorine-dioxide-Ready-to-use-solution/590013
LINK: https://youtu.be/Mj_y2YXAJKQ
You can fi nd an application fi lm at www.youtube
DKL Germany.
Video: DK-DOX 150 READY-TO-USE
CHLORINE DIOXIDE SOLUTION GLASS AM-
POULES FOR THE BOTTLE CARE SYSTEM