DKL CHAIRS L2-ECO, Operating Instructions Manual

Page: 17 / 266

17
Moving the Treatment Chair
Move the joystick downwards
>Treatment chair moves downwards.
Move the joystick upwards
>Treatment chair moves upwards.
Move the joystick to the left
>Back rest tilts backwards.
Move the joystick to the right
>Back rest moves to an upright position.
Tap the JoystickTwice
>Treatment chair moves to the entry /exit position.
Tap the joystick twice downwards
>Treatment chair moves to the treatment positionp2.
Tap the JoystickTwice to the Left
>Treatment chair moves to the rinsing position and back to the last position when tapping twice again.
Tap theJoystickTwice to the Right
>Treatment chair moves to the treatment position p1.
Press “p0“
>Treatment chair moves to the position for getting on/off .
Press “p1“
>Treatment chair moves to treatment position p1.
Press “p2“
>Treatment chair moves to treatment position p2.
Press “p3“
>Treatment chair moves to treatment position p3.
Briefl y press “lp“
>Treatment chair moves to the rinsing position and after
renewed pressing back to the “last position”.
For programming the keys, move to the desired programme position manually and then keep the
respective programme key pressed for about 3 seconds until you hear a signal tone. Now you
have successfully saved your individual treatment position.
Saving programme keys p0 – p3
Press the ”lp“ key to move the chair to the rinsing position. By pressing the key “Ip” once again,
the chair moves back to the previous programme position or to the manually set position. In
order to programme the chair, move it manually to the desired rinsing position and then keep the
key “Ip” pressed for about 3 seconds until you hear a signal tone. Now you have successfully
saved your rinsing position.
Saving programme key LP
Programme keys at the back rest
Joystick at the chair base
Joystick