14
Room thermostat DK LOGIC 100
14. PAr2 mode - program version and RESET
(cont.)
1.
Press the button for a few times till the PAr2
symbol appears. Confirm by pressing .
1.
Press the button for a few times till the
PAr3
symbol appears. Confirm by pressing .
t
t
2.
A number of the installed program, e.g. 10.04
will appear on the screen. Pressing the button
will cause the controller to switch to the
main screen view.
14.1 RESET
If necessary, it is possible to reset all the settings, returning to the factory
controller. To do this:
1.
Go to the view of the program number.
2.
Press and hold the
“-”
button for a few seconds;
RES will appear on the screen, and after a while
the controller will switch to the main screen
view - it will be working on the factory (default)
settings, realizing the
Pr1
program.
15. PAr3 mode - temperature correction
PAr3
The temperature correction function allows you to adjust the room
temperature display. Setting range from -5 ° C to + 5 ° C every 0.1 ° C.
If we find that the thermostat indicates abnormal
room temperature, we can correct it.
2.
Use the
"- / +"
buttons to set the value for which
the room temperature display will be increased
or decreased. Confirm with the button - after
a moment the regulator will automatically go to
the main screen view.
