Installation instructions
We recommend to entrust a garage with the installation of your new car radio. Then please
hand these instructions to the garage staff. If you install your new car radio yourself, please
follow these instructions carefully.
Place of installation
If there are several possible places in your car to install the car radio, please bear in mind
the following points:
Decide for a place that you think will later make it easy for you to operate the device
.
The installation place must not interfere with the processes and visibility conditions in
your car.
Avoid installing your car radio in places that would subject the device to high
temperatures, be it through direct sunlight or the car heating
.
Avoid installing your car radio in places that would subject the device to excessive dust or
dirt, e.g. near the ash tray. You also should avoid installing your car radio in places that
subject the device to increased levels of vibration
The angle of inclination of the device should not exceed 20°. Please use the supplied
installation material only
.
To remove the Flash MP3 Player
5
5
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
Turn off the power of the main unit first.
Press the button to bring down the control panel.
Press the clip until a “click” sound is heard.
Carefully pull out the build-in flash MP3 player from the unit.
