over, until you leave the repeat mode by pressing the REPEAT button again or if your cancel
playback by pressing the STOP button.
Random playback
If you want to let the device play the tracks in a random order, press the
RANDOM
button.
“RDM” will appear in the display. Press this button again to end random play. The tracks will
then be played in the normal sequence again.
Playback in programmed order
You can programme the playback of tracks in a special sequence of up to 20 tracks selected
by yourself.
Ø
To select the tracks for your individual sequence, stop playback first. Then press the
PROG.
button. Now “PRG” is flashing in the display and invites you to select track no. 01.
Ø
Now use the
9
or
:
buttons to select the first track.
Ø
Press the PROG. button, to store that track. “
02
” in the display shows you that you now
may store track 2. Repeat above steps, until all desired tracks have been stored.
Ø
Press the PLAY/PAUSE button, to start the playback of the programmed sequence.
To delete the programme press the STOP button twice, or open the CD compartment, or
switch to radio operation. Then the PROG indication in the display goes out.
Radio operation
Ø
Move the function switch to the RADIO position. Select the desired frequency range
using the BAND switch.
Ø
For FM reception you need to pull out the telescope antenna on the rear side of the unit.
Turn the antenna to find the best antenna orientation.
For AM reception the device has a built-in antenna. If AM reception is noisy or distorted,
please turn the unit to find the best orientation.
Ø
Use the TUNING control to select the broadcasting stations. The dial scale above the
TUNING knob will help you to locate stations.
Ø
When receiving FM Stereo transmission, the FM ST indication is activated. For MONO
transmission or weak, noisy reception, put the BAND switch into FM position to improve
the sound quality.
8
