Power supply
You can operate this device with the mains voltage of AC230V~ / 50 Hz, or with battery
power.
Mains operation
Connect the mains cord to a properly wired wall outlet with a voltage of AC230V~ / 50 Hz
and to the mains socket on the rear panel of the unit. Now the device is operational.
Battery operation
Open the battery compartment on the bottom side of the unit. Insert 6 x 1.5V UM-2 R14 „C”
size batteries (not supplied) into the compartment according to the insertion instructions in
the battery compartment. Observe the correct polarity of the batteries, as otherwise the
device may suffer damage. Due to their longer service life, we recommend you to use
alkaline batteries. Close the compartment again. Now the device is operational.
Batteries must not be thrown in the household waste. Please take used
batteries to the respective collecting points or take them there where
you have bought the new ones. Do not throw batteries into the fire.
General operation
Move the FUNCTION switch to choose the desired function.
Ø
"CD” for CD playback, or
Ø
"RADIO” for radio reception, or
Ø
"TAPE”
for cassette operation.
To switch the unit off, move the FUNCTION switch to the „TAPE
(OFF)” position.
Alternatively, you can switch off the unit by pressing the POWER button on top of the unit.
If
you switch off the unit like this you can only turn it on again using the POWER
button
.
With the
VOLUME
controller at the left side of the unit you can set the volume as
requested. Turn the controller towards the rear to increase the volume. Turn it towards the
front to lower the volume.
Headphone Operation
You can connect a headphone to the
PHONES
jack at the rear end in the device using a
3.5mm jack plug. This deactivates the build-in speakers.
Be careful with regard to your hearing. A too high volume may lastingly impair the
hearing ability of your ears.
6
OFF
