djive VACUMATE Ultralight, Manual

Page: 61 / 82

13
Esp
añ
ol
LIMPIEZA Y MANTENIMIENTO \\\
Vaciado del Depósito de Polvo
1. Sostenga la aspiradora sobre un
contenedor de basura. Empuje el
botón de liberación del depósito
de polvo para abrir la parte infe-
rior del depósito de polvo (Fig. 2).
El fondo se abrirá y los residuos
caerán en el contenedor de
basura (Fig. 3).
2. Sacuda la aspiradora para liberar
los residuos que puedan quedar
dentro del depósito de polvo.
3. Una vez que el depósito de polvo
esté vacío, presione el fondo con
firmeza en el depósito hasta que
encaje y quede fija.
8
Fig. 4
Fig. 5
MAINTENANCE AND CARE
Fig. 2 Fig. 3
NOTE: Always turn off the vacuum
before performing any service.
Do not fill the dust cup past the
Max Fill Line (Fig. 1).
Emptying the Dust Cup
1. Hold the vacuum over a trash container.
2. Push the dust cup release button to
open the bottom of the dust cup
(Fig. 2). The bottom will open and
the debris will fall into the trash
container (Fig. 3).
3. Shake the vacuum to release any debris
that might be inside the dust cup.
4. When the dust cup is empty of debris,
firmly push the bottom onto the dust
cup until it clicks and is fully latched.
Removing and Replacing the
dust cup (for Cleaning)
1. Push the dust cup removal button
while pushing the dust cup away from
the vacuum to remove it from the
vacuum (Fig. 4).
2. Pull the metal ring to remove the filter
cartridge from the dust cup (Fig. 5).
3. Rinse the dust cup with warm water
and allow to dry thoroughly before
re-attaching to the vacuum.
4. Align the filter cartridge to the dust
cup and slide into place (Fig. 6).
5. Align the arrows on the dust cup and
the vacuum (Fig. 6) then slide until it
clicks into place.
Fig. 6
Fig. 1
IMPORTANTE – Siempre
apague la aspiradora antes
de realizar tareas de manteni-
miento. No llene el depósito de
polvo más allá de la línea de
llenado máximo (Fig. 1).
8
Fig. 4
Fig. 5
MAINTENANCE AND CARE
Fig. 2 Fig. 3
NOTE: Always turn off the vacuum
before performing any service.
Do not fill the dust cup past the
Max Fill Line (Fig. 1).
Emptying the Dust Cup
1. Hold the vacuum over a trash container.
2. Push the dust cup release button to
open the bottom of the dust cup
(Fig. 2). The bottom will open and
the debris will fall into the trash
container (Fig. 3).
3. Shake the vacuum to release any debris
that might be inside the dust cup.
4. When the dust cup is empty of debris,
firmly push the bottom onto the dust
cup until it clicks and is fully latched.
Removing and Replacing the
dust cup (for Cleaning)
1. Push the dust cup removal button
while pushing the dust cup away from
the vacuum to remove it from the
vacuum (Fig. 4).
2. Pull the metal ring to remove the filter
cartridge from the dust cup (Fig. 5).
3. Rinse the dust cup with warm water
and allow to dry thoroughly before
re-attaching to the vacuum.
4. Align the filter cartridge to the dust
cup and slide into place (Fig. 6).
5. Align the arrows on the dust cup and
the vacuum (Fig. 6) then slide until it
clicks into place.
Fig. 6
Fig. 1